Note: Hazardous chemicals must be shipped via UPS Ground. All other shipping options will be removed from checkout if added to cart. If you need expedited services for non-hazardous products, please make a separate transaction.

Titebond II Premium Wood Glue is the only leading brand, one-part wood glue that passes the ANSI Type II water-resistance specification.

It is ideal for exterior woodworking projects, including outdoor furniture, birdhouses, mailboxes, planters and picnic tables. Titebond II Premium provides a strong initial tack, fast speed of set, superior strength and excellent sandability. It is FDA approved for indirect food contact (cutting boards) and is ideal for radio frequency (R-F) gluing systems.

Features & Benefits

  • First One-Part Wood Glue To Pass Ansi Type Ii Water-Resistance
  • Excellent Sandability
  • Fda Approved For Indirect Food Contact
  • Easy Cleanup With Water
  • Designed For Exterior Use
  • Unaffected By Finishes
  • Ideal For Radio Frequency (R-F) And Hot Press Gluing Systems

Application Guidelines

  • Application Temperature: Above 55ºF
  • Open Assembly Time: 3-5 Minutes (70ºF./50%RH)
  • Total Assembly Time: 10-15 Minutes  (70ºF./50%RH)
  • Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon
  • Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
  • Method Of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
  • Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
  • Limitations: Titebond II Premium Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Physical Properties

  • Type: Cross-linking polyvinyl acetat
  • State: Liquid
  • Weight Per Gallon: 9.1 lbs
  • Color: Honey Cream
  • Dried Film: Translucent, yellow
  • Solids: 48%
  • Viscosity: 4,000 cps
  • PH: 3.0
  • Calculated VOC: 3 g/L
  • Flashpoint: > 200ºF
  • Freeze / Thaw Stability: Stable
  • Chalk Temperature:  To assure a good bond, 55°F is the lowest recommended temperature of the glue, air and materials during application.
  • Storage Life: 24 months in tightly closed containers at 75°F

Bond Strength ASTM D-905 (On Hard Maple)



Wood Failure

Room Temperature

3,750 psi


150°F. Overnight

1,750 psi


Specifications & Certifications


Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.