Titebond Original Wood Glue
SKU: TITE5064
Titebond Original Wood Glue is the industry standard for woodworking.
It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes. Titebond Original can help any woodworker achieve professional-looking results. It is ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Titebond Original is easy to use, non-toxic and cleans up with water.
Features & Benefits
- Fast Set – Shortens Clamp Time
- Solvent-Resistant
- Unaffected by Finishes
- FDA Approved For Indirect Food Contact
- Bonds Stronger Than Wood
- Excellent Sand-ability
- Easy Cleanup With Water
Application Guidelines
- Application Temperature: Above 50ºF
- Open Assembly Time: 4-6 Minutes (70ºF./50%RH)
- Total Assembly Time: 10-15 Minutes (70ºF./50%RH)
- Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon
- Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
- Method Of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
- Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
- Limitations: Titebond Original Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
Physical Properties
- Type: Aliphatic resin emulsion
- State: Liquid
- Weight Per Gallon: 9.2 lbs
- Color: Yellow
- Dried Film: Translucent
- Solids: 46%
- Viscosity: 3,200 cps
- PH: 4.0
- Calculated VOC: 3 g/L
- Flashpoint: > 200ºF
- Freeze / Thaw Stability: Stable
- Chalk Temperature: To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application.
- Storage Life: 24 months in tightly closed containers at 75°F
Bond Strength ASTM D-905 (On Hard Maple)
|
Temperature |
Strength |
Wood Failure |
| Room Temperature |
3,600 psi |
77% |
| 150°F. Overnight |
1,600 psi |
10% |
- CONFORMS TO ASTM D-4236
Caution Statement
CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.