6" Mounting Cup w/ Tie-Down Bail - Pack of 4

Wood's Powr-Grip TL6TD — 6" Vacuum Mounting Cup with Steel Tie-Down Bail for Flat and Curved Surfaces (70 lbs / 32 kg) — Pack of 4

The Wood's Powr-Grip TL6TD is a 6" vacuum mounting cup with a steel tie-down bail that provides a reliable, temporary anchor point for securing and tying down loads on smooth, nonporous surfaces — without welding, drilling holes, or damaging the surface. The steel bail serves as the connection point for straps, ropes, bungee cords, and tie-down hardware, allowing the cup to function as a removable, repositionable tie-down anchor on any smooth nonporous flat or curved surface. Rated for 70 lbs (32 kg), rated for both flat and curved surfaces with a minimum radius of 12" (305 mm), and operable down to 0°F (-18°C). Mounting platform height is 1-21/32" (4 cm). Sold as a Pack of 4 with pad protectors. The TL6TD (SKU: 91340, Model: TL6TD) is manufactured by Wood's Powr-Grip.

The TL6TD is a tie-down cup, not a hand cup and not a threaded stud mounting cup. The steel bail is designed for attachment of tie-down straps, ropes, and securing hardware — not for threaded fasteners or equipment mounting. This makes the TL6TD the correct choice when you need a temporary, no-drill anchor point for securing cargo, equipment, or loads in transit or during work operations on smooth nonporous surfaces such as vehicle glass, polished stone, metal panels, and architectural glass.

Key Features & Benefits

Steel Tie-Down Bail — Temporary No-Drill Anchor Point for Securing Loads

The TL6TD’s steel bail provides a strong, durable connection point for tie-down straps, ropes, bungee cords, and securing hardware. The bail geometry allows straps and hooks to attach at multiple angles, accommodating different tie-down directions and load configurations. The vacuum cup base attaches to the surface without welding or drilling, providing a temporary, repositionable anchor that leaves no permanent marks or damage when removed.

Eliminates Welding and Drilling — No Surface Damage

The TL6TD eliminates the need for welding or drilling holes to create a tie-down anchor point on smooth nonporous surfaces. This makes it suitable for surfaces where permanent modification is not permitted — including vehicle glass, finished architectural surfaces, leased equipment, and any surface where drilling or welding would cause unacceptable damage or void warranties.

70 lb (32 kg) Rated Capacity — Flat and Curved Surfaces — Min. 12" Radius

Rated for 70 lbs (32 kg) of tie-down load on flat and curved smooth, nonporous surfaces with a minimum radius of 12" (305 mm). The flat+curved rating makes the TL6TD suitable for vehicle glass, curved architectural panels, and curved metal surfaces in addition to flat surfaces.

TL6 Standard Rubber Pad — 6" — 0°F Rating — Pack of 4 with Pad Protectors

Uses the TL6 standard rubber pad (6" diameter) — the same pad family as the TL6HG and TL6FH hand cups, making replacement pads interchangeable across TL6 family products. Rated for operation down to 0°F (-18°C). Sold as a Pack of 4 with pad protectors to keep the TL6 pads clean and protected during storage and transport.

Common Applications

Vehicle Glass Tie-Down Anchoring

Auto glass technicians and vehicle transport operators use the TL6TD to create temporary tie-down anchor points on vehicle glass surfaces for securing glass panels, windshields, and automotive components during transport or work operations without drilling into the vehicle body or glass.

Cargo Securing on Smooth Nonporous Surfaces

Transport and logistics operators use the TL6TD to create temporary tie-down anchor points on smooth nonporous cargo surfaces — including polished stone slabs, glass panels, and smooth metal panels — where conventional tie-down hardware cannot attach without damaging the surface.

Temporary Load Securing During Fabrication and Installation

Fabricators and installers use the TL6TD to temporarily secure panels, slabs, and materials during cutting, edging, and installation operations where a repositionable anchor point is needed on a smooth nonporous surface.

Architectural Glass and Stone Securing

Glaziers and stone contractors use the TL6TD to create temporary tie-down points on architectural glass panels and polished stone slabs during transport, staging, and installation where the surface cannot be drilled or welded.

Compatible Surfaces

• Flat and curved plate glass and float glass (min. 12" radius)
• Tempered and laminated safety glass (flat and curved)
• Vehicle glass and automotive surfaces (flat and curved)
• Polished granite, marble, and engineered stone (flat and curved)
• Smooth painted or coated metal panels (flat and curved)
• Any smooth, nonporous flat or curved surface with min. 12" (305 mm) radius

Not compatible with: rough, textured, or porous surfaces; surfaces with radius tighter than 12" (305 mm); surfaces contaminated with oil, wax, or debris; applications requiring permanent load-bearing attachment.

Technical Specifications

Safety Data Summary

• Vacuum loss can result in sudden load release — inspect the cup and verify vacuum attachment before applying tie-down tension
• Do not exceed the 70 lb (32 kg) rated load capacity
• Do not use on rough, textured, or porous surfaces
• Do not use on surfaces with radius tighter than 12" (305 mm)
• Do not use for permanent load-bearing applications — this is a temporary securing solution
• Ensure tie-down straps and hardware are rated for the intended load before attaching to the bail
• Damaged or contaminated pads must be replaced before use
• Operating below 0°F (-18°C) may degrade rubber pad performance

Frequently Asked Questions

Q: What is the difference between the TL6TD and the TL3AMB mounting cup?
A: The TL6TD uses a steel tie-down bail as the connection point — designed for attaching straps, ropes, and tie-down hardware to secure loads. The TL3AMB uses a threaded stud — designed for bolting equipment, fixtures, and brackets to the cup. Choose the TL6TD for load securing and tie-down applications; choose the TL3AMB (or other threaded stud mounting cups) for equipment mounting applications.

Q: Is the TL6 pad interchangeable with TL6 hand cups?
A: Yes. The TL6TD uses the TL6 standard rubber pad (6" diameter), which is the same pad family used on the TL6HG and TL6FH hand cups. Replacement TL6 pads are available separately through Wood’s Powr-Grip authorized distributors.

Q: Is this product made to order?
A: Yes. This product is made to order and all sales are final. Please confirm your surface type, curvature radius, and load requirements before placing your order.