KFM 16-15 F (601753620) Bevelling Tool with precise setting of chamfer angle directly using the guide plate

METAL CARRY CASE

  • Metal Bevelling tool for chamfer heights up to 15mm for weld seam preparation
  • One-touch controller: Patented, tool-free setting of the cutting depth in 0.1" steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
  • Precise setting of chamfer angle directly using the guide plate
  • Universal carbide burr with three carbide inserts for all chamfer angles from 0-90°
  • Controlled work with large-surface guide plates
  • Stop roller to guide along pipes for easy weld seam preparation
  • Bail handle adjusts without tools for secure, even guiding
  • Metabo Long-life motor with patented dust protection for long service life
  • Electronic overload protection, soft start and restart protection
  • Protection for users with metal sheet sides to deflect chips
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Parameters
No-load speed
12000 RPM
Amps
14.2 AMPS
Rated input power
1550 W
Output power
900 W
Type of edges
Chamfer
Max. chamfer width 45°
13/16 "
Max. chamfer height at 45°
5/8 "
Grade cutting depth setting
0.1 mm
Curvature smallest exterior Ø
3 15/16 "
Weight (without power cable)
15.2 lbs
Cable length
157 1/2 "
Noise emission
Sound pressure level
93 dB(A)
Sound power level (LwA)
104 dB(A)
Uncertainty of measurement K
3 dB(A)