Tamlyn Residential Safety Strap (RRS46) - Case of 12

The Tamlyn Residential Safety Strap (RRS46) is a one-time-use fall protection anchoring device designed for residential framing and roofing applications.

It is used as part of a personal fall arrest system to provide a temporary but secure attachment point to structural framing members during construction.

This safety strap is intended for use by trained personnel only and must be installed in accordance with approved safety procedures. It is designed to help reduce fall risk during residential roof framing, sheathing, and related elevated construction activities.

Key Features & Design

• One-time use residential safety strap
• 2" wide high-strength synthetic webbing
• 2-1/2" steel D-ring sewn to one end
• Reinforced folded loop on opposite end
• Quick wrap-and-tighten installation method
• Designed for structural framing attachment
• Lightweight and easy to deploy on jobsite
• Component of a complete fall arrest system

Installation Overview

The strap is installed by looping the D-ring end through the web loop and securing it around a structural framing member. Once tightened, it creates a temporary anchorage point for fall protection systems.

Proper installation requires:

• Attachment only to verified structural members
• Installation under supervision of a competent person
• Use of full fall protection system components
• Pre-use inspection of strap and connection points

Important Safety Information

• This is a single-use fall protection device
• Must be used only as part of a complete fall arrest system
• Not intended for reuse after load event or damage
• Must be installed only on structurally sound framing members
• Do not expose to temperatures above 200°F
• Do not expose to welding sparks or corrosive environments
• Must be inspected before each use
• Improper use can result in serious injury or death

Applications

The Residential Safety Strap is commonly used in:

• Residential roof framing
• Roof sheathing installation
• Elevated wood framing work
• Residential construction sites
• Temporary fall protection anchoring
• Structural framing tie-off points

Technical Specifications (TDS Summary)

• Product Code: RRS46
• Strap Width: 2 inches
• Material: High-strength synthetic webbing
• End Fitting: 2-1/2" steel D-ring
• Configuration: One-time-use anchoring strap
• Installation Method: Wrap-and-loop structural attachment
• Application Type: Residential fall protection anchorage
• Load System: Designed as part of a full fall arrest system (not standalone rated capacity use)

Compliance & Standards

• Must be used in accordance with OSHA fall protection requirements
• Intended as a component in a complete personal fall arrest system
• Installation must follow manufacturer guidelines and jobsite safety regulations
• Must be inspected prior to each use for damage or wear

Safety Data Sheet (SDS) Summary

The Residential Safety Strap is considered a fabricated safety device made of synthetic webbing and metal components.

General Safety Classification

• Not classified as a chemical hazard under normal use
• Mechanical injury risk exists if improperly used or loaded

Handling Guidelines

• Inspect before each use for cuts, fraying, or damage
• Do not modify or alter strap components
• Replace after single use or load event
• Avoid exposure to heat sources above 200°F
• Keep away from welding sparks and corrosive chemicals

First Aid Notes

• If strap failure results in fall exposure, follow standard emergency response procedures
• Treat any related injuries immediately with medical attention

Important Usage Disclaimer

The Residential Safety Strap is only one component of a complete fall protection system. It must be used with compatible harnesses, lanyards, and anchorage systems as part of a full OSHA-compliant fall arrest setup. Proper training and supervision are required for safe use.