Note: Hazardous chemicals must be shipped via UPS Ground. All other shipping options will be removed from checkout if added to cart. If you need expedited services for non-hazardous products, please make a separate transaction.

Tenax Titanium Extra Clear Knife Grade Glue.  Colors for glue are available 

Tenax Titanium Vinyl Ester Extra Clear Knife Grade is the latest generation of vinyl ester glue formulas.
Titanium Extra Clear is virtually completely clear in film during application
Tenax Titanium is extremely strong with excellent adhesion with a very fast cure time of about 15 minutes.

Tenax used the latest raw resin materials to make Titanium very low yellowing in outdoor or UV applications.
Titanium cures shiny and is very easily polished.
Titanium takes color very well. Just a drop goes a very long way for easier color matching.

Titanium is a drip-less formula glue. So it will stay on the edge and not on the floor.

Titanium in the can looks very very light in color and when spreading it becomes almost invisible. This characteristic makes working with light and white colored materials much easier.

With a gel time of 4-5 minutes and a full cure in about 15 minutes, the Tenax Titanium will keep the production pieces moving through the shop.

Tenax Titanium is made to work with:
Marble- especially white colored materials
Granite- all granites
Quartz- all quartz materials, especially the white
Ceramic and Porcelain- from the thinnest to the thickest materials, the bond is extremely strong


Instructions for use:

Make sure the surface to be treated is dry, clean and free of dust. If coloring, add the coloring paste to the resin before mixing it with the catalyst. An excess of coloring paste may affect the final product so use caution. Mixing ratio resin to catalyst is 100:2/3 (see chart below). Stir vigorously and apply. Do not place unused product back in the can. Make sure can is sealed tightly after use.

25°C = 77°F

SHELF LIFE:

Keep away from heat, humidity and sun. Product will last at least 10 months if kept between 68°F - 77°F.

SAFETY:

Please read the safety data sheet before using.

INSTRUCTIONS FOR USE:

Make sure the surface to be treated is dry, clean and free of dust. If coloring, add the coloring paste to the resin before mixing it with the catalyst. An excess of coloring paste may affect the final product so use caution. Mixing ratio resin to catalyst is 100:2/3 (see chart below). Stir vigorously and apply. Do not place unused product back in the can. Make sure can is sealed tightly after use.

25°C = 77°F

SHELF LIFE:

Keep away from heat, humidity and sun. Product will last at least 10 months if kept between 68°F - 77°F.

SAFETY:

Please read the safety data sheet before using.

Mixing Ratio: 100+2/3
Gel time at 77°: 4-6 min
Tacky free time at 77°: 18-20 min
Working time at 77°: 20-25 min
Temp. range for use after hardening: 32°-230°

Technical Data

Viscosity cps 25°C 20 r.p.m.(ASTM D2196)Tixotropic pasteDensity at 25°C gr/cm 31.1AspectTransparent White PasteRatio of use glue/hardener100+2/3Gel time (in bulk) at 77° (25°C) in min4-6 minTacky free in thin layer at 77° (25°C) in min18-20 minWorking time suggested at 25°C in min20-25 minMinimum reaction temperature+5°CMinimum temperature of use after hardening32° (+5°C)Maximum temperature of use after hardening230° (+110°C)Shelf life at 25°C10 monthsAdhesion force at 25°c marble botticino after 2 hour in Mpa ASTM D 45417.5Adhesion force at 25°c on natural granite after 2 hour in Mpa ASTM D 45418.4Adhesion force at 25°c technical quartz after 2 hour in Mpa ASTM D 45419.7

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jay McCarthy
Jay McCarthy...furniture finisher

Glued two broken marble halves together. Fast set. Had to work fast with clamps but the stuff is a super-strong bond. Highly recommend it!