Vertigo S Glue (Formerly Titanium)

Tenax Vertigo S Knife Grade and Flowing Glue 

Tenax Vertigo S 5 Gallon Knife Grade is the latest generation of vinyl ester glue formulas.

Vertigo S Knife Grade is virtually completely clear in film during application. Tenax Vertigo S is extremely strong with excellent adhesion with a very fast cure time of about 20 minutes.

Tenax used the latest raw resin materials to make Vertigo S very low yellowing in outdoor or UV applications.

Vertigo S cures shiny and is very easily polished.

Vertigo S takes color very well. Just a drop goes a very long way for easier color matching.

Vertigo S is a drip-less formula glue. So, it will stay on the edge and not on the floor.

Vertigo S in the can looks very light in color and when spreading it becomes almost invisible. This characteristic makes working with light and white colored materials much easier.

With a gel time of 4-5 minutes and a full cure in about 20 minutes, the Tenax Vertigo S will keep the production pieces moving through the shop.

Tenax Vertigo S is made to work with:

• Marble - especially white colored materials.
• Granite - all granites.
• Quartz - all quartz materials, especially the white.
• Ceramic and Porcelain - from the thinnest to the thickest materials, the bond is extremely strong.

Instructions for use:

Make sure the surface to be treated is dry, clean and free of dust. If coloring, add the coloring paste to the resin before mixing it with the catalyst. An excess of coloring paste may affect the final product so use caution. Mixing ratio resin to catalyst is 100:2/3 (see chart below). Stir vigorously and apply. Do not place unused product back in the can. Make sure can is sealed tightly after use.

Shelf Life:

Keep away from heat, humidity and sun. Product will last at least 12 months if kept between 68°F - 77°F.

Safety:

Please read the safety data sheet before using.

Tenax Vertigo Water Clear Flowing Glue

Tenax Vertigo Water Clear Flowing has been developed with the latest Vinyl Ester technology. Vertigo Water Clear Flowing is ideal for filling holes, seaming, laminations, miters, chip repair on all granite, marbles, quartz and quartzite, ceramic, porcelain, sintered stone materials. Vertigo Flowing is super water clear. Takes color very well for darker stones.

Tenax Vertigo Water Clear Flowing is very fast and has very good workability, easy to stir and spread, and stays a flowing consistency even after adding the hardener. Tenax Vertigo Flowing has excellent adhesion in a short amount of time which enables the stone to be handled in a very fast time even at low temperatures. After curing, Vertigo Flowing has a flat surface with a high gloss and is very polishable.

Water Clear
Excellent adhesion in short amount of time
Superb on white and light material
Very polishable
Colors easily
Instructions for Using Vertigo Flowing:
Make sure the surface to be treated is dry, clean and free of dust. If coloring, add the coloring paste to the resin before mixing it with the catalyst. An excess of coloring paste may affect the final product so use caution. Mixing ratio resin to catalyst is 100:2/3 (see chart below). Stir vigorously and apply. Do not place unused product back in the can. Make sure can is sealed tightly after use.

25°C = 77°F

Shelf Life:
Keep away from heat, humidity and sun. Product will last at least 12 months if kept between 68°F - 77°F.

Safety:
Please read the safety data sheet before using.