
Wall Corner Protective Guards
DURABLE CORNER GUARDS.
Put an end to damaged corners with commercial and residential plastic corner guards. Guards provide protection for high impact and traffic areas. All corner guards have a 90 degree angle. Specially designed screws and nails can be driven through without damaging the guards. Each plastic corner protector is clear.
To apply, clean the surface prior to application. For self-stick corner guards, simply peel off release paper & place on corner at desired location. Press along both edges of Corner Guard from bottom to top to make sure adhesive is in contact with the surface.
Nail-on corner guards can be applied with the specialty nails. Hold the corner guard in place, and hammer nails through the corner guard, into place. We recommend starting at the bottom first. Hole punched corner guards can be nailed into place with provided nails.
*NOTE: Not pre-drilled – Specially designed screw/nails can be driven through these corner guards without damaging the corner guard. Make sure you also grab some of our door jamb protectors.
Residential
ITEM # | SPEC | PACK | SIZE |
---|---|---|---|
01434 | Nail-on* | 18 | 5/8″ x 5/8″ x 4′ (1.6cm x 1.6cm x 1.22m) |
01834 | Nail-on* | 18 | 5/8″ x 5/8″ x 8′ (1.6cm x 1.6cm x 2.44m) |
11434A | Self-stick | 18 | 5/8″ x 5/8″ x 4′ (1.6cm x 1.6cm x 1.22m) |
11834A | Self-stick | 18 | 5/8″ x 5/8″ x 8′ (1.6cm x 1.6cm x 2.44m) |
Commercial
ITEM # | SPEC | PACK | SIZE |
---|---|---|---|
01184G | Hole-punched | 12 | 1 1/8″ x 1 1/8″ x 4′ (2.9cm x 2.9cm x 1.22m) |
01188G | Hole-punched | 8 | 1 1/8″ x 1 1/8″ x 8′ (2.9cm x 2.9cm x 2.44m) |