WorCraft 20V Cordless Sliding Miter Saw — 7-1/4 in, Tool Only

Crosscut trim, miter decking, bevel framing lumber, and make compound cuts — all cord-free on the jobsite or in the shop.

The WorCraft 20V Cordless Sliding Compound Miter Saw runs a 7-1/4 in 40-tooth blade at 3,600 RPM across dual slide rails that handle boards up to 7-7/8 in wide in a single pass. A built-in laser guide keeps every cut on the line, and the rotating aluminum table miters from -45° to 45° with positive stops for repeatable accuracy.

Built for Accurate Crosscuts and Miters

The single-bevel head tilts 0–45° to the left for compound cuts. Depth-of-cut adjustment handles trenching and rebating. Material support bars steady long stock, and the D-handle keeps control comfortable through repetitive cuts. Robust alloy construction stands up to daily jobsite use.

Cutting Capacity

• Straight (0° × 0°): 2 in × 7-7/8 in (51 × 200 mm)
• Miter (45° × 0°): 2 in × 6 in (51 × 152 mm)
• Bevel (0° × 45°): 1-3/8 in × 7-7/8 in (35 × 200 mm)
• Compound (45° × 45°): 1-3/8 in × 6 in (35 × 152 mm)

Specifications

• Voltage: 20V
• No-load speed: 3,600 RPM
• Blade: 7-1/4 in (185 mm), 40T, 1 in (25.4 mm) arbor
• Miter range: -45° to 45° with positive stops
• Bevel: Single-bevel, 0–45° left
• Features: Laser guide, depth-of-cut adjustment, material support bars, D-handle, dust bag
• Weight: 19.8 lbs (9 kg), tool only
• Runtime: approx. 30 min (4.0Ah battery)
• Battery platform: WorCraft 20V ONE FOR ALL — 4.0Ah or larger recommended
• Sold: Tool only — battery and charger sold separately
• Model: CMS-S20Li

What’s in the Box

• WorCraft 20V Cordless Sliding Miter Saw (CMS-S20Li)
• 2 extension bars
• Saw blade (40T, mounted)
• Dust bag
• Hex spanner
• Instruction manual

Frequently Asked Questions

Q: Is this a single- or double-bevel saw?
Single-bevel — the head tilts 0–45° to the left. For a bevel cut on the opposite side, flip the workpiece.

Q: How wide a board can this miter saw cut?
Up to 7-7/8 in (200 mm) in a single pass thanks to the dual slide rails — enough for wide trim, decking, and framing lumber.

Q: Does it come with a battery?
No — it’s sold tool-only so you can run it on WorCraft 20V ONE FOR ALL batteries you already own. A 4.0Ah or larger pack is recommended for this high-draw tool. Battery and charger are sold separately.

Works Well With

Pair with WorCraft 20V ONE FOR ALL batteries and accessories for a complete cordless cutting setup.

• WorCraft 7-1/4 in TCT Miter Saw Blade — 40T — the genuine replacement blade for this saw. Keep a spare on hand for high-volume cutting sessions.
• WorCraft 20V 4.0Ah Battery — ONE FOR ALL, USB-C Output — recommended for this high-draw saw. Approx. 30 min runtime per charge — keep a second pack charged for uninterrupted cutting.
• WorCraft 20V 2.0Ah Battery Pack — ONE FOR ALL — suitable for lighter trim work and shorter sessions.
• WorCraft 20V Battery Charger — 2.4A, ONE FOR ALL — fast 2.4A charging to keep batteries turning over during long cutting sessions.
• WorCraft 20V Cordless Brad Nailer & Stapler — 2-in-1, Tool Only — cut trim and molding to length on the miter saw, then nail it in place with the brad nailer.
• WorCraft 20V Brushless Hammer Drill — drill anchor points and fasteners after cutting framing and lumber to size.