Final Finish Rapid-Hardening, Polymer-Modified Concrete Resurfacer

SKU: FINFIN-15-PAIL
Vendor
SpecChem
Regular price
$221.82
Sale price
$221.82
Regular price
$0
Sold out
Unit price
Quantity must be 1 or more

Final Finish is a rapid-hardening, polymer-modified concrete resurfacing mortar for a smooth, buttery finish on floors and walls

Final Finish combines a long pot life with rapid hardening, minimizing waste and labor for thin cosmetic repairs that need fine texture detail. It contains no crystalline silica and is suitable for interior and exterior use on horizontal and vertical surfaces.

Key Features & Benefits

  • One-component — just add water
  • Long pot life (up to 3 hours at 72°F) combined with rapid hardening
  • Contains no crystalline silica
  • Light gray color
  • Applies from featheredge up to 1/4" depth (thicker areas should use Overcrete)
  • Reaches full cure in 24 hours

Application Instructions

  • Ensure the concrete is free of oil, grease, dust, laitance, and other contaminants; pre-dampen porous or very dry/hot substrates to SSD
  • For trowel or sponge float applications, apply pressure to force material into cracks, voids, and honeycombed areas
  • For wall applications, fill low areas and voids with SpecPatch or Overcrete first and let harden, then apply a thin layer of Final Finish with a sponge float or trowel
  • A second coat may be applied before the first fully cures, if needed, avoiding extreme heat or wind
  • Clean tools and equipment with water before the material hardens
  • Protect from rain or excess water until fully cured (24 hours)

Technical Data Summary

  • Pot Life: Up to 3 hours at 72°F
  • Coverage: Approximately 120 sq ft per 40 lbs at 1/16" thickness
  • Shelf Life: 18 months unopened, stored in a cool, dry place away from direct sunlight and extreme temperature/humidity

Packaging

Available in 15 lb pails, 40 lb bags, and 40 lb pails.

Supporting Documents

Safety Data Sheet (SDS)

Technical Data Sheet (TDS)

Go to full site