SpecHard Water-Based Siliconate Sealer/Densifier

SKU: SHARD-5
Vendor
SpecChem
Regular price
$121.28
Sale price
$121.28
Regular price
$0
Sold out
Unit price
Quantity must be 1 or more

SpecHard-Intraseal is a water-based silicate/siliconate sealer and densifier that hardens and beautifies concrete floors under pedestrian and vehicle traffic

SpecHard-Intraseal is a colorless, proprietary blend that penetrates concrete to seal, densify, and harden it, extending its lifespan and reducing maintenance. It's environmentally friendly, VOC compliant, and odorless, resisting dusting for years with a low sheen finish.

Key Features & Benefits

  • Strengthens and densifies concrete, improving abrasion and compressive strength
  • Reduces porosity, resisting water, oil, and chemical penetration
  • Dustproofs surfaces and helps control hairline cracks
  • VOC compliant, non-yellowing
  • Meets ACI 302 Class 1-5 concrete floors and Class 9 super flat floor standards; USDA compliant
  • Compatible with SpecChem SpecTilt bond breakers

Application Instructions

  • Coverage

    • Hard Troweled Finish 200-350 square feet/gallon
    • Broom or Float Finish 150-250 square feet/gallon
    • Rough Slab Finish 150-200 square feet/gallon
    • Old Concrete 150-250 square feet/gallon

    Surface Preparation

    • Ensure cleanliness: The concrete surface must be clean and free from oil, grease, dust, laitance, or any surface contaminants.
    • Existing Concrete: The surface must be open textured and absorbent.
    • New Concrete: Allow curing for a minimum of 28 days unless using moisture-tolerant products.

    Mixing and Application

    • Mixing: No mixing required; the product is ready to use as delivered.
    • Application: Apply with a low-pressure sprayer or roller.
      • Coverage: Approximately 300-500 sq ft per gallon, depending on surface porosity.

    Placement Procedure

    • Application: Apply a single, uniform coat ensuring complete coverage.
    • Penetration: Allow material to penetrate for up to 30 minutes. Remove excess material thoroughly with squeegees or mops.

    Finishing/Curing

    • Finishing: No additional finishing is required after application.
    • Curing: The product is self-curing under normal conditions.
    m performance

Packaging

Available in 5-gallon pails.

Supporting Documents

Safety Data Sheet (SDS)

Technical Data Sheet (TDS)

Go to full site