Soudabond Easy Reusable Foamfo - Case of 12

Soudabond Easy is a fast curing, ready to use, one component, PU adhesive.

20 oz. aerosol can Genius Gun

• Polyurethane Adhesive

• Moisture Cure, One Component

• One Can Replaces up to 10 (24oz gun)/ 7.5 (20oz

Genius) Quart Tubes of Solvent Based Adhesive

• One Can Covers up to 140ft 2 (24oz Gun)/ 105ft 2

(20oz Genius) of Insulation Boards

Base

Consistency

Curing system

Curing speed (*)

Skin formation (*)

Can be trimmed (*)

Full strength (*)

Post expansion

Thermal conductivity (DIN 52612)

Tensile strength

Shear strength

Temperature resistance

UL 723 (ASTM E 84) Fire test

Single component polyurethane

Stable adhesive foam (does not sag)

Moisture cure at room temperature

About 30 minutes -1.2-inch adhesive bead

About 8 minutes - 1.2-inch adhesive bead

About 50 minutes -1.2-inch adhesive bead

About 12 hours - 1.2-inch adhesive bead

Minimal

About 0.035 W/(m·K)

27.6 lb./in 2

20.6 lb. /in 2

-40°F to +194°F when cured/ +248 °F (up to max. 1 hour)

Flame Spread 15, Smoke Developed 35

(*) Measured at 68 °F / 65 % R.H. These values may vary depending on ambient factors such as temperature, humidity and type of substrate.

Limitations:

• Excellent adhesion on most substrates, except for PTFE, PE and PP.

• Always store can with the valve pointed upwards.

• Cured PU foam must be protected from UV radiation.

• Lower temperature and humidity will extend curing time.

• Excellent Adhesion to Most Building Materials

• Even Sticks to Moist Surfaces

• High Initial Grip (Green Strength)

• Great Thermal & Acoustical Insulation

• Cost-saving (Time & Labor)

• Solvent Free

• CFC-free Propellants, Harmless to Ozone Layer