At FrogTape®, we have sharp paint lines down to a science. We combined our exclusive PaintBlock® Technology with a high-performance adhesive system to deliver painter's tapes that block paint bleed and instantly stick to your surface.
From DIYers new to painting to veteran paint pro's and industrial contractors, we can help. The FrogTape® portfolio has grown from a single solution into a toolkit of tape technologies that can tackle any project at home or on the job.
A Family of Brands
Headquartered in Hickory, N.C., Shurtape Technologies, LLC, is a global, industry-leading manufacturer and marketer of pressure-sensitive tapes, serving numerous markets, including DIY, home products, industrial/MRO, building and construction, packaging, HVAC, professional paint, automotive, marine, aerospace, arts and entertainment, graphic arts, sound control, medical and retail.
In addition to specialty adhesive solutions, we offer products under recognizable brand names such as Duck®, FrogTape®, Painter’s Mate®, Shurtape®, T-Rex®, Kip® and Pro Tapes®.
Prep
Clean the surface with a sponge and mild soap from the bottom up, rinsing the sponge frequently. Make sure all walls and surfaces are completely dry and dust-free before you paint.
TIPS
Preparation
Make sure you've gathered your supplies ahead of time
Clear the area before you begin; use drop cloths or plastic sheets to protect surfaces
After cleaning the surface, use a microfiber cloth on the surface to ensure any remaining particles are removed
Repair any damage to make sure you have an even surface
Apply
Experienced painters can unroll the tape in one long section and keep the roll flat against the wall. For less experienced painters, apply the tape in shorter sections to avoid stretching the tape.
Then, go over the edge of the tape with a firm plastic tool like a putty knife or plastic card to eliminate gaps and seal the edges.
TIPS
Textured Surface
Painting on a medium-textured surface with a Paintblock®Technology treated tape? Run a damp cloth over the edges of the tape to activate PaintBlock Technology for sharp paint lines.
Application
Overlap corners and edges
Take your time to avoid stretching the tape — this can cause poor adhesion to the surface and cause paint bleed.
Test in a hidden area
If old paint is peeling, bubbling or is applied thickly on surface take caution — this surface might not be ideal for tape application
Remove
For best results, remove the tape while the paint is still wet. Pull the tape off slowly at a 45-degree angle. If you hear ripping noises, it means you’re going too fast.
TIPS
Removal
Pay attention to the clean removal days — this is the number of days prior to painting that a tape can remain safely on the surface
Pull the tape parallel to the surface
Throw the tape directly into the trash — if you leave it on a surface, it might track paint residue
If the paint has fully dried and a bridge has formed between the wall and tape, score the tape edge with a razor blade
What Not To Do
Don't remove the tape straight up or perpendicular
Don't rush — if you go too fast, you might have to re-paint the surface