Crank-Out Cantilever
SKU: CC-4-2-20-12-12S
Crank-Out Cantilever for Safely storing, stacking, and retrieving long, pipe, tube, or bar stock
The Crank-Out Cantilever is ideal for storing and retrieving bar stock, angle iron, tube, pipe, rollers, busbar, mandrels, and extrusions. Rack Engineering Division’s Crank-Out Cantilever allows for overhead access to product with its 100% extendable shelves. The Crank-Out Cantilever offers a variety of options with a single or double-sided unit including removable pin dividers to separate individual SKU’s and holders for short stock or remnants
Standard Features
- Less injuries
- 100% extensive shelves
- Space efficiency
Options & Accessories
- Intermediate support, up to 20′ long
- All welded and adjustable stock dividers
- UHMW lined arms
- Custom colors
- Single or double-sided units
| General | ||||||||
| Levels | 20″ Deep Arms | 24″ Deep Arms | 30″ Deep Arms | 36″ Deep Arms | ||||
| Arm Height | 12″ | 15″ | 12″ | 15″ | 12″ | 15″ | 12″ | 15″ |
| 3-Levels | 83 1/2″ | 95 1/2″ | 83 1/2″ | 95 1/2″ | 83 1/2″ | 95 1/2″ | 83 1/2″ | 95 1/2″ |
| 4-Levels | 105 1/2″ | 120 1/2″ | 105 1/2″ | 120 1/2″ | 105 1/2″ | 120 1/2″ | 105 1/2″ | 120 1/2″ |
| 5-Levels | 127 1/2″ | 145 1/2″ | 127 1/2″ | 145 1/2″ | 127 1/2″ | 145 1/2″ | 127 1/2″ | 145 1/2″ |
| 6-Levels | 149 1/2″ | 170 1/2″ | 149 1/2″ | 170 1/2″ | 149 1/2″ | 170 1/2″ | 149 1/2″ | 170 1/2″ |
| 7-Levels | 171 1/2″ | 195 1/2″ | 171 1/2″ | 195 1/2″ | 171 1/2″ | 195 1/2″ | 171 1/2″ | 195 1/2″ |
| 8-Levels | 193 1/2″ | 220 1/2″ | 193 1/2″ | 220 1/2″ | 193 1/2″ | 220 1/2″ | 193 1/2″ | 220 1/2″ |
| Depth | 62″ | 70″ | 82″ | 94″ | ||||
| Capacity | 6,600 lbs. per arm | 5,600 lbs. per arm | 4,800 lbs. per arm | 4,200 lbs. per arm | ||||
* Each upright has a 20,000 lbs. capacity stationary top
Pin Specific Stock Divider rests on the cradle arm and does not have to be welded on at the time of manufacture. Fixed divider positions are specified by customer at time of order.
Adjustable Multiple Stock Divider rests on the cradle arm and bolts into a piece of unistrut with unistrut nuts. It can be used in almost any position or quantity on the cradle arm.
Individual Stock Divider clamps onto the cradle arm and is secured into place using two standard fasteners. It can be used in almost any position or quantity on the cradle arm.
Intermediate Support new and improved standard design. Same basic design as always with easier access and ability to remove the support when needed.