Crank-Out Cantilever

Call for Pricing

Shipping calculated at checkout.

Sides

Single Sided Double Sided

Size

12’ Long w/ 12"H x 20"D Arms - 13200 lbs. capacity 12’ Long w/ 15"H x 20"D Arms- 13200 lbs. capacity 20’ Long w/ 12"H x 24"D Arms - 11200 lbs. capacity 20’ Long w/ 15"H x 24"D Arms - 11200 lbs. capacity 40’ Long w/ 12"H x 36"D Arms - 14400 lbs. capacity 40’ Long w/ 15"H x 36"D Arms - 14400 lbs. capacity

Product variants

Safe & Secure Payments.

Crank-Out Cantilever for Safely storing, stacking, and retrieving long, pipe, tube, or bar stock

The Crank-Out Cantilever is ideal for storing and retrieving bar stock, angle iron, tube, pipe, rollers, busbar, mandrels, and extrusions. Rack Engineering Division’s Crank-Out Cantilever allows for overhead access to product with its 100% extendable shelves. The Crank-Out Cantilever offers a variety of options with a single or double-sided unit including removable pin dividers to separate individual SKU’s and holders for short stock or remnants

Standard Features

Less injuries
100% extensive shelves
Space efficiency

Options & Accessories

Intermediate support, up to 20′ long
All welded and adjustable stock dividers
UHMW lined arms
Custom colors
Single or double-sided units

General
Levels	20″ Deep Arms		24″ Deep Arms		30″ Deep Arms		36″ Deep Arms

Arm Height	12″	15″	12″	15″	12″	15″	12″	15″
3-Levels	83 1/2″	95 1/2″	83 1/2″	95 1/2″	83 1/2″	95 1/2″	83 1/2″	95 1/2″
4-Levels	105 1/2″	120 1/2″	105 1/2″	120 1/2″	105 1/2″	120 1/2″	105 1/2″	120 1/2″
5-Levels	127 1/2″	145 1/2″	127 1/2″	145 1/2″	127 1/2″	145 1/2″	127 1/2″	145 1/2″
6-Levels	149 1/2″	170 1/2″	149 1/2″	170 1/2″	149 1/2″	170 1/2″	149 1/2″	170 1/2″
7-Levels	171 1/2″	195 1/2″	171 1/2″	195 1/2″	171 1/2″	195 1/2″	171 1/2″	195 1/2″
8-Levels	193 1/2″	220 1/2″	193 1/2″	220 1/2″	193 1/2″	220 1/2″	193 1/2″	220 1/2″
Depth	62″		70″		82″		94″
Capacity	6,600 lbs. per arm		5,600 lbs. per arm		4,800 lbs. per arm		4,200 lbs. per arm

* Each upright has a 20,000 lbs. capacity stationary top

Pin Specific Stock Divider rests on the cradle arm and does not have to be welded on at the time of manufacture. Fixed divider positions are specified by customer at time of order.

Adjustable Multiple Stock Divider rests on the cradle arm and bolts into a piece of unistrut with unistrut nuts. It can be used in almost any position or quantity on the cradle arm.

Individual Stock Divider clamps onto the cradle arm and is secured into place using two standard fasteners. It can be used in almost any position or quantity on the cradle arm.

Intermediate Support new and improved standard design. Same basic design as always with easier access and ability to remove the support when needed.