Caldwell EB-15 Fixed Length Fork Lift Boom

Caldwell EB-15 Fixed Length Fork Lift Boom — Lightweight, Dependable Lifting for Job Site and Warehouse Use

The Caldwell EB-15 Fixed Length Fork Lift Boom is a purpose-built attachment designed to extend the reach and versatility of standard lift trucks without the complexity or cost of a telescoping boom. Rated at 0.75 tons (1,500 lbs.) maximum capacity, it is engineered for contractors, trades professionals, and warehouse operations that require consistent, repeatable lifts at a fixed working distance. Whether handling lumber, rebar, cement blocks, or finished goods in a manufacturing environment, the EB-15 delivers reliable performance in demanding conditions.

When telescoping capability is not required, the EB-15 offers a more efficient and economical solution than adjustable-length alternatives. Its lightweight construction — at 185 lbs. — minimizes the impact on lift truck rated capacity, and its fixed-length design simplifies setup and operation in repetitive lift applications. The EB-15 also accepts up to a 2-inch wide sling, broadening its compatibility with common rigging configurations on the job site.

Key Features & Benefits

Fixed Length Design

The EB-15 uses a fixed-length boom configuration, making it ideal for applications where a consistent reach is required and telescoping adjustment would add unnecessary complexity. This design reduces setup time and keeps the attachment straightforward to operate for lift truck operators in fast-paced environments.

Restraining Chain with Grab Hook

Included with the EB-15 is a restraining chain and grab hook, providing a critical secondary retention point for loads during transport and positioning. This feature supports safe rigging practices and helps prevent unintended load movement while the boom is in use.

1,500 lb. Uniform Capacity Across All Hook Positions

The EB-15 maintains its full 1,500 lb. rated capacity at every hook position — from 4 feet through 8 feet — giving operators consistent performance regardless of load placement along the boom. This uniform capacity simplifies load planning and eliminates the need to recalculate limits at different positions.

Accepts Up to 2-Inch Wide Slings

The hook opening and boom geometry are designed to accept slings up to 2 inches in width, making the EB-15 compatible with a wide range of standard rigging hardware found on construction sites and in manufacturing facilities. This flexibility reduces the need for specialized rigging equipment.

Optional Swivel Hook Available

For applications requiring load rotation or easier hook engagement, an optional swivel hook is available for the EB-15. This option adds versatility when working with loads that need to be oriented during placement without repositioning the lift truck.

Low Headroom Requirement

With a headroom (HR) dimension of 13.34 inches, the EB-15 is suited for environments with overhead clearance constraints, including interior warehouse aisles, loading docks, and covered job site storage areas. This compact headroom profile expands the range of locations where the boom can be safely deployed.

Common Applications

Lumber and Timber Handling

The EB-15 is well suited for lifting and positioning lumber bundles, beams, and dimensional stock on construction sites where fork trucks are already in operation. Its fixed length provides consistent reach when offloading deliveries or stacking materials at height.

Rebar and Steel Stock Lifting

Contractors can use the EB-15 to lift rebar bundles and structural steel sections using sling rigging, keeping materials organized and positioned precisely at the point of use on large pours and structural framing operations.

Cement Block and Masonry Unit Placement

The EB-15 handles palletized or sling-rigged cement blocks, allowing masons and concrete contractors to move heavy masonry units efficiently without manual handling. Its consistent capacity across all hook positions supports safe placement at varying distances from the lift truck mast.

Raw Materials Handling in Manufacturing

In manufacturing and fabrication environments, the EB-15 can be used to move raw material stock — including coil, bar, tube, and plate — from receiving areas to production floors using standard sling rigging attached to the boom hook.

Finished Goods and Crated Product Movement

Warehouses and distribution operations can use the EB-15 to lift and position crated or banded finished goods that cannot be safely handled by forks alone, providing a versatile attachment option without requiring a dedicated overhead crane.

General Construction Site Material Placement

The EB-15 is a practical tool for general contractors managing multiple material types on active job sites, enabling a single lift truck to handle tasks that would otherwise require additional equipment or manual labor.

Compatible Materials

• Lumber and dimensional timber
• Rebar and structural steel bar stock
• Cement blocks and masonry units
• Crated and banded finished goods
• Raw manufacturing stock (coil, bar, tube, plate)
• Bagged materials and bundled goods (when sling-rigged)
• General construction site materials within rated capacity

Product Documents

• Download Catalog

Technical Specifications

Safety Data Summary

Hazard Information

• Capacity of the lift truck and attachment combination may be less than the capacity shown on the attachment.
• Overloading the boom or exceeding the rated lift truck capacity can result in equipment failure, dropped loads, and serious injury or death.
• Improper rigging or use of damaged slings may cause load instability during lifting operations.

Personal Protective Equipment

• Hard hat required in all areas where overhead lifting is in progress.
• Steel-toed boots required when working in proximity to suspended loads.
• High-visibility safety vest recommended on active job sites.
• Gloves recommended when handling rigging hardware and chains.

Safe Handling

• Consult the lift truck manufacturer to determine the rated capacity of the lift truck and attachment combination before use.
• Never exceed the rated capacity of either the boom attachment or the lift truck.
• Ensure the restraining chain and grab hook are properly secured to the load before lifting.
• Keep all personnel clear of the load path during lifting and travel operations.
• Inspect the boom, chain, grab hook, and all rigging hardware before each use and remove from service if damage is found.

Frequently Asked Questions

Q: What is the maximum load capacity of the Caldwell EB-15?
A: The EB-15 has a maximum rated capacity of 1,500 lbs. (0.75 tons) at all hook positions from 4 feet through 8 feet. Note that the effective lifting capacity of the lift truck and boom combination may be less than this figure — consult your lift truck manufacturer for guidance.

Q: Does the EB-15 include a restraining chain?
A: Yes. The EB-15 comes standard with a restraining chain and grab hook to provide secondary load retention during lifting and transport operations.

Q: Is a swivel hook available for the EB-15?
A: Yes. An optional swivel hook is available for the EB-15 for applications requiring load rotation or easier hook engagement. Contact Diamond Tool Store for availability and pricing.

Q: What is the maximum sling width the EB-15 can accept?
A: The EB-15 is designed to accept slings up to 2 inches in width, making it compatible with a broad range of standard rigging hardware used on construction sites and in industrial environments.

Q: How does the EB-15 differ from the EB-40 model?
A: The EB-15 is a lightweight fixed-length boom rated at 1,500 lbs., designed for applications where a single hook position and consistent capacity are sufficient. The EB-40 is a heavier-duty fixed-length model rated at 4,000 lbs. and features five alternate hook positions with fixed or swivel hook options, making it better suited for variable load distances and higher capacity requirements.

Q: Can the EB-15 be used with any lift truck?
A: The EB-15 is designed to work with standard fork trucks, but the combined rated capacity of the lift truck and boom attachment may be less than the attachment's stated capacity. Always consult your lift truck manufacturer to verify the combined capacity before use to ensure safe operation.