Enviro Klean 2010 All Surface Cleaner and Degreaser

Enviro Klean 2010 All Surface Cleaner — Concentrated Multi-Surface Cleaner and Degreaser for Stone, Tile, Masonry, and Concrete

Enviro Klean® 2010 All Surface Cleaner is a next-generation concentrated cleaner and degreaser formulated for light-to-heavily soiled stone, tile, masonry, and concrete. Designed to meet the demands of industrial and commercial job sites, it is equally effective for lighter-duty tasks, making it a versatile single-product solution for contractors across multiple trades. EK 2010 cleans metal, concrete, and warehouse surfaces at full concentration, and dilutes up to 1:10 for home-use applications including windows, bathroom tile, and countertops. Its water-rinsable, solvent-free formula makes it practical for a wide range of substrates without the handling complexity of acid- or caustic-based cleaners.

Unlike conventional cleaners that require stocking multiple product types for different soiling levels and surface materials, EK 2010 replaces a host of individual cleaning agents in one container. It also removes PROSOCO Siloxane PD overspray from windows — a specific, documented capability that adds value on projects where water repellents are applied.

Technical Specifications

Key Features & Benefits

Industrial-Strength Concentration

At full concentration, EK 2010 tackles the toughest soiling on concrete, metal, and plant or warehouse surfaces — eliminating the need to source a specialized heavy-duty degreaser for industrial cleaning jobs. Contractors can use a single product for multiple scope items on the same project.

Dilutable for Light-Duty Tasks

EK 2010 can be diluted up to 1 part cleaner to 10 parts clean water for lighter jobs such as windows, bathroom tile, and countertops. This adjustability reduces product waste and lets crews calibrate strength to the actual soiling level, reducing material cost per job.

Replaces Multiple Cleaning Agents

By consolidating the performance of several individual cleaners into one product, EK 2010 simplifies procurement, reduces inventory overhead, and cuts the number of products crews need to transport and store on site.

Zero VOC — Fully VOC Compliant

With a VOC content of 0, EK 2010 is compliant with all national, state, district, consumer, and institutional product VOC regulations. For contractors working on LEED-registered projects or in strict air-quality jurisdictions, this eliminates a common compliance risk.

No Harsh Acids, Caustics, or Solvents

The formula contains no harsh acids, caustics, or solvents, which lowers handling risk and reduces the likelihood of surface damage compared to aggressive chemical alternatives. Water-rinsability makes cleanup straightforward after application.

Biological Stain Removal

EK 2010 effectively removes moderate biological staining from masonry and related substrates, extending its utility to exterior restoration and maintenance work where algae, mold, or mildew growth is present.

Common Applications

Concrete and Masonry Cleaning

Use at full concentration for heavily soiled concrete floors, walls, or masonry facades on industrial and commercial job sites. The concentrated formula is suited to plant and warehouse environments where soiling levels are high.

Stone and Tile Cleaning

Cleans light-to-heavily soiled stone and tile surfaces. Note: repeated use may dull polished carbonate surfaces including limestone, marble, and travertine — test before full-scale application on sensitive materials.

Metal Surface Degreasing

Effective as a degreaser on metal surfaces in plant and warehouse environments, reducing the need for a separate solvent-based degreaser on mixed-material projects.

Biological Stain Removal on Masonry

Addresses moderate biological staining on exterior masonry, making it suitable for restoration and ongoing maintenance work on building facades and hardscape.

Siloxane PD Overspray Removal

Documented to remove PROSOCO Siloxane PD overspray from windows, providing a targeted cleanup solution when water repellent products have been applied on or near glazed surfaces.

Light-Duty Interior Cleaning (Diluted Use)

When diluted, EK 2010 is suitable for windows, bathroom tub and tile, and countertops — useful for post-construction cleaning tasks where multiple surface types need to be addressed with a single product.

Compatible Materials

• Concrete
• Masonry
• Stone (note: repeated use may dull polished carbonate surfaces such as limestone, marble, and travertine)
• Tile
• Metal
• Windows (glass)
• Bathroom tub and tile surfaces
• Countertops

Product Documents

• Product Data Sheet
• Product Data Sheet (Canadian French)
• Product Data Sheet (Spanish)
• Safety Data Sheet
• Safety Data Sheet (Spanish)
• SDS Canadian French
• LEED Verification Letter

Application Instructions

Pre-Application Testing

1. Test all substrates not intended to be treated with EK 2010 before beginning full-scale application.
2. If testing indicates adverse effects on a substrate, protect that surface before proceeding.
3. Test each type of masonry and each type of stain using the same equipment and application procedures planned for the full job.
4. Allow the test area to dry 3–7 days before inspection and approval.
5. Keep the test panel available for comparison throughout the cleaning project.

Site Preparation

1. Protect people, vehicles, property, plants, and all surfaces not intended for cleaning from product, splash, rinse, residue, fumes, and wind drift.
2. Rinse non-target materials with large quantities of water. Protect grass and plantings with sprinklers.
3. Divert pedestrian and vehicle traffic if necessary. Clean when traffic is at a minimum.
4. Ensure air and surface temperatures are 50°F (10°C) or above. Do not apply when temperatures are below freezing or will be overnight. If freezing conditions exist before application, allow masonry to thaw.

Dilution and Mixing

1. For heavy soiling, use EK 2010 at full concentration (undiluted).
2. For light-duty cleaning, dilute up to 1 part cleaner to 10 parts clean water.
3. Do not alter or mix with other chemicals.

Application

1. Apply with a low-pressure sprayer, brush, or heavy nap roller.
2. Scrub heavily soiled surfaces with a nonabrasive brush or synthetic scrubbing pad.

Rinsing

1. Rinse with enough water and pressure to flush spent cleaner and dissolved soiling from the surface and surface pores without damage.
2. For porous masonry, masonry-washing equipment generating 400–1,000 psi with a water flow rate of 6–8 gpm is recommended. Use a 15–45° fan spray tip.
3. Heated water (150–180°F; 65–82°C) may improve cleaning efficiency.
4. For sensitive surfaces, use adjustable equipment to reduce water flow rates and rinsing pressure. Rinsing pressures greater than 1,000 psi and fan spray tips smaller than 15° may permanently damage sensitive masonry. Water flow rates less than 6 gpm may reduce cleaning productivity and contribute to uneven results.

Storage and Handling

1. Store in a cool, dry place at 45–100°F (7–38°C).
2. Always seal container after dispensing.
3. Do not alter or mix with other chemicals.
4. Do not double stack pallets.
5. If product freezes, allow to thaw and mix well before use.
6. Dispose of in accordance with local, state, and federal regulations.

Safety Data Summary

Hazard Information

• Contains no harsh acids, caustics, or solvents
• Flash point greater than 200°F (>93°C) — low flammability risk under normal use conditions
• Freeze point: 32°F (0°C) — avoid freezing during storage
• 24-hour emergency information: INFOTRAC at 800-535-5053

Personal Protective Equipment

• Always read the full label and Safety Data Sheet for precautionary instructions before use
• Use appropriate safety equipment and job site controls during application and handling

Safe Handling

• Store in a cool, dry place in a tightly sealed container
• Do not alter or mix with other chemicals
• Seal container after each use
• If product freezes, allow to thaw and mix well before use
• Dispose of in accordance with local, state, and federal regulations
• Protect non-target surfaces, people, plants, and vehicles from product contact, splash, and rinse water

Frequently Asked Questions

Q: Can EK 2010 be used on polished marble or travertine?
A: Use caution on polished carbonate surfaces including limestone, marble, and travertine. The product data sheet notes that repeated use may dull these surfaces. Always test in a small area first and allow 3–7 days before evaluating results.

Q: What dilution ratio should I use for light-duty cleaning tasks?
A: For light-duty applications such as windows, bathroom tile, or countertops, dilute up to 1 part EK 2010 to 10 parts clean water. For heavy industrial soiling, use the product at full concentration.

Q: What is the coverage rate?
A: Coverage ranges from 50 to 1,000 sq ft per gallon depending on the substrate and soiling level. Refer to the Product Data Sheet for substrate-specific coverage guidance.

Q: Is EK 2010 compliant for use on LEED-registered projects?
A: EK 2010 has a VOC content of 0 and is compliant with all national, state, district, consumer, and institutional product VOC regulations. A LEED Verification Letter is available for download from the Product Documents section above.

Q: What equipment is recommended for rinsing masonry after application?
A: Masonry-washing equipment generating 400–1,000 psi with a water flow rate of 6–8 gpm and a 15–45° fan spray tip is recommended for porous masonry. For sensitive surfaces, reduce pressure and flow rate accordingly; pressures above 1,000 psi or tips smaller than 15° may permanently damage sensitive masonry.

Q: Can EK 2010 remove Siloxane PD overspray from windows?
A: Yes. EK 2010 is documented to remove PROSOCO Siloxane PD overspray from windows, making it useful for cleanup following water repellent applications.