HYDROREP Water Repellent Sealer

Ready to use, no dilution necessary. On a clean, dry surface apply an even, generous coat of HYDROREP with a brush, roller or airless sprayer.

Apply the product until the surface is fully saturated, then wait 8 hours.
A second coat may be necessary, depending on the absorbency of the material. On dense natural stone apply only one coat. For concrete and porous natural stone, two coats are needed. The surface may be used for normal foot traffic after 8 hours. Full cure and maximum sealer protection is achieved in 24 hours. To provide an oil repellent barrier on exterior surfaces, apply a finishing coat of FOB after 8 hours.

COVERAGE

Technical Sheet

Safety Sheet