10,000 Lumen USB/AC LED Tripod Work Light – Portable High-Output Lighting

Voltec 10,000 Lumen USB/AC LED Tripod Work Light – High-Output Portable Jobsite Lighting

The Voltec 08-00746 is a 72-watt AC-powered LED tripod work light delivering 10,000 lumens of high-output illumination for large work areas. Designed for contractors and trades professionals, it features an extendable tripod with an adjustment leg for balance, a rugged die cast aluminum housing, and a 2-in-1 quick-release design with a removable H-base for versatile deployment. The unit ships with a 5ft 18/3 AWG SJTW cord and carries cULus listing, making it suitable for demanding jobsite, workshop, garage, event, and emergency lighting applications.

Technical Specifications

Unlike battery-powered alternatives, the AC-powered design of the 08-00746 delivers consistent, uninterrupted 10,000-lumen output without runtime limitations or battery management overhead. The 2-in-1 quick-release system with removable H-base gives contractors the flexibility to use the light on the tripod or detach it for placement on a flat surface, a versatility not commonly found in single-configuration work lights.

Key Features & Benefits

10,000-Lumen High Power LED Output

Delivering 10,000 lumens at 72 watts, this light provides broad, bright coverage across large work areas. The high-power LED light source is rated for 50,000 hours of service life, significantly reducing replacement frequency and long-term cost on extended projects.

2-in-1 Quick-Release with Removable H-Base

The quick-release mechanism allows the light head to detach from the tripod and mount to the included H-base in seconds without tools. This gives contractors the option to position the light at floor level or on a flat surface when tripod height is not practical.

Extendable Tripod with Balance Adjustment Leg

The extendable tripod allows customizable height and lighting angle to direct illumination exactly where it's needed. The dedicated adjustment leg provides stable footing on uneven jobsite surfaces, reducing tip-over risk.

Tool-Free Quick-Head Adjustment

The lamp head angle can be repositioned without any tools, allowing fast repositioning as work progresses through a space. This saves time on active jobsites where lighting needs shift frequently.

High/Low/Off Switch on Each Lamp Head

The three-mode switch (100%, 50%, Off) on each lamp head lets contractors dial in the right light level for the task, conserving energy during lower-demand work phases without shutting down entirely.

USB-C Charging Port & Additional NEMA 5-15 Outlet

An onboard USB-C port keeps phones and tablets charged at the work area, eliminating the need for a separate charging solution. The additional NEMA 5-15 outlet on the back of the light head provides a convenient power tap for small tools or accessories.

Rugged Die Cast Aluminum Housing

The die cast aluminum housing is built to withstand the physical demands of jobsite and outdoor use. This construction provides durability against impacts and environmental exposure that would compromise lighter plastic-bodied alternatives.

Common Applications

Active Construction Jobsites

The 10,000-lumen output and adjustable tripod make this light well-suited for illuminating large interior or exterior work areas during active construction phases.

Workshops and Garages

The AC-powered design and stable tripod base provide reliable, consistent lighting for workshop and garage environments where a permanent overhead fixture is insufficient or unavailable.

Events and Temporary Lighting

The quick-release base system and extendable tripod allow rapid setup and breakdown, making this unit practical for temporary event lighting applications.

Emergency Lighting

When permanent lighting fails or is unavailable, the high-lumen output and portable tripod design allow this unit to serve as an effective emergency lighting solution in commercial or industrial settings.

Outdoor Work Areas

The rugged die cast aluminum housing and jobsite-tough construction support use in outdoor conditions where exposure to the elements is a factor.

Compatible Materials

• General construction work areas (interior and exterior)
• Workshop and garage environments
• Temporary event and staging areas
• Emergency and backup lighting scenarios
• Outdoor jobsite conditions

Product Documents

• Download Spec Sheet
• Product Catalog

Frequently Asked Questions

Q: Does this work light require batteries?
A: No. The 08-00746 is AC-powered and connects via the included 5ft 18/3 AWG SJTW cord with a standard NEMA 5-15 plug, providing consistent output without battery management.

Q: Can the light head be used without the tripod?
A: Yes. The 2-in-1 quick-release feature allows the light head to be removed from the tripod and mounted to the included removable H-base for floor-level or flat-surface placement.

Q: What USB port type is included for device charging?
A: The unit includes a USB-C charging port capable of powering phones, tablets, and small devices directly from the light.

Q: Is there an additional power outlet on the unit?
A: Yes. There is an additional NEMA 5-15 outlet located on the back of the light head, providing a convenient power tap for small tools or accessories.

Q: What brightness modes are available?
A: Each lamp head includes a High/Low/Off switch providing 100%, 50%, and Off settings to match light output to the task at hand.

Q: What is the rated lifespan of the LED light source?
A: The high-power LED is rated for 50,000 hours of operation, reducing the need for frequent bulb replacement on long-term projects.