Diamond Cutting Blade 1A1R 100 Elegant

Perfect edge even on glaze

Chips are the main difficulty when cutting glazed tiles, red-hot porcelain gres. The decisive factor of the cutting purity is the diamond blade.

The Elegant blade is the best solution for finishing cutting of complex materials.

The disk uses a very fine diamond and a self-sharpening bond. The small diameter of 100 mm of the blade creates advantages during finishing cutting in comparison to the 115- and 125-mm diameters, since it practically does not lead to the sides, the blade has minimal vibrations.

The blade provides such a clean cut that it is almost impossible to find even minimal chips, including on glazed tiles. No further edge processing is required. The blade also leaves no chips on the reverse mounting side of the tile. This is especially important in the manufacture of countertops and ceramic furniture.

This is the cleanest blade from the entire Distar line. Install and enjoy the result.

The blade used on handle angle grinder without the use of coolant.