FEATURES:
Want to take a closer look? Learn more about the product in depth by exploring its features and benefits.
Superior power with low emissions
Patented X-torq TM engine that uses air to flush out the cylinder provides exceptional power but keeps fuel consumptions and emissions low
Magnesium blade guard
Contributes to a light weight which gives an improved power-to-weight ratio. New step less adjustment makes it easier to change cutting position.
Reduced wear
Reduced wear thanks to the drive belt with fully sealed transmission, which keeps out the cutting dust.
Cuts close to walls or ground
The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed transmission. This keeps out cutting dust etc, reducing wear.
Maintenance-free air filter
The only time the filter needs to be checked and changed is if you experience lack of power.
Reversible cutting arm
The drive belt with fully sealed transmission keeps out cutting dust for reduced wear and allows close cutting to walls and floor.
Blade retarder
Reduces the stop time of the blade when the machine is switched off, which enables you to quickly move on to the next job.
Active Air Filtration™
Our two-step filtration system with centrifugal cleaning and a single paper filter increases product life and extends service intervals.
Anti-vibration system
Our anti-vibration system reduces vibrations in the cutter handles, so they are more comfortable to hold and can be used for longer periods. To provide the user a comfortable operating position reduced strain, the distance between the handles is large. The handles and the short engine body mean the user always stands close to the machine, for easier handling and control.
EasyStart
EasyStart ensures easier starting by reducing the compression in the cylinder.
SmartCarb™
Our built-in automatic filter compensation maintains high power during the air filter life time.
Poly-V belt
Provides better transmission of power, less frequent re-tensioning and extended service intervals.
Wet cutting kit
Less slurry and low water consumption thanks to the progressive water valve, this adjusts the water volume to the exact amount needed.
Engine
Cylinder displacement
7.25 cu.inch
Exhaust emissions (CO2 EU V)
726 g/kWh
Cutting equipment
Cutting depth, max
5.7 in
Blade diameter, max
16 in
Blade thickness, max
0.2 in
Peripheral speed, max
18000 fpm
Dimensions
Product size width
9.57 in
Product size height
18.23 in
Sound and noise
Sound power level, guaranteed (LWA)
117 dB(A)
Sound pressure level at operators ear
104 dB(A)
Vibrations
Vibrations left/front handle
6.9 m/s²
Vibrations right/rear handle
6.3 m/s²
Certifications
Cert machine dir. 2006/42/EC Decl. No.
EURO TEST CERTIFICATE SEC/10/2287
.png)
Apply Here 
