Industrial Planer IP-208

This 20”-wide thickness planer can quickly turn rough lumber into boards with smooth faces. Heavy cast iron and steel construction keeps the material steady and supported.

• 5 hp motor turns the cutter head at a whopping 5,000 rpm.
• Straight 4-knife cutter head comes standard.
• Runs on 220-volt single-phase power, so it can work almost anywhere.
• Fully cast iron 20” x 25.75” table with 15” extensions can expand to an impressive 20” x 55.75”.
• 2 speeds allow you to pick what’s right for your project:
  • 20 feet per minute when you need to smooth boards in shorter amount of time.
  • 16 feet per minute when you want a more refined finish or you’re working with tougher material.
• 8” maximum and .25” minimum cutting height.
• Maximum ⅛” cut depth.
• Handwheel with a scale on the side of the planer lets you precisely adjust the height in seconds.
• Cast iron frame on the top and bottom stabilizes the machine and helps it last longer.
• Magnetic safety switch automatically turns the machine off in case of a power outage or a problem with the current.
• Anti-kickback fingers grip the material so it’s less likely to shoot back out if the blades get jammed.
• Extra-large 5” dust port prevents clogging. You can easily hook up your dust collection system, so your shop stays clean with breathable air.
• Built-in wheels on the base allow you to move the machine around your shop and store it.
• Covered by a 1-year parts warranty.

Specs

Item Number	IP-208
Shipping Weight	920lbs
Table Size (Length)	55-3/4"
Table Size (Width)	20"
Spindle Travel	5000
Maximum Depth of Cut (Resaw)	1/8"
Cutter Head Diameter	3-1/4"
Max Stock Width	20"
Number of Knives	4
Maximum Stock Height	8"
Minimum Stock Thickness	1/4"
Minimum Stock Length	8"
Feed Speed	16/20 FPM
Table Elevation	Manual
Power	220V Single Phase
Horse Power	5
Weight (lbs)	880
Shipping Dimensions (Inches)	60x44x55

* specifications subject to change without notice.