Built from steel and cast iron, this numerically controlled 18” jointer/planer saves space and does the work of 2 machines without compromising on quality.

  • 7.5 hp motor has enough strength to cut and smooth 18” boards.
  • 4.75” helical cutter head (included) spins at 5,700 rpm.
  • 6 rows of rotatable carbide blades on the spiral cutter head will remain sharp for much longer than a straight-knife cutter could.
  • Baileigh JP-1898-NC jointer planer runs on 220-volt 3-phase power.
  • 98” table supports your boards, ensures true, straight cuts.
  • Digital controller lets you adjust the height of the 63” x 18” jointer table.
  • Programmable system for the planer lets you enter your desired spacing, and machine takes care of the rest.
  • Control panels with big stop and start buttons are simple to use.
  • Parallelogram-style jointer bed helps prevent accidents by maintaining a tight, uniform gap between the table and the cutter—regardless of the table height.
  • 5/16” maximum cutting depth at the jointer station.
  • Fence can tilt up to 45° for edge joining.
  • 71” x 18” planer table (with a large resting area on both sides) makes it easier for you to maneuver the material.
  • Variable infeed speed from 16 to 50 feet per minute lets you finetune to fit the wood you’re working with and get a better finish.
  • Rubber infeed and outfeed rollers reduce friction and keep boards moving smoothly.
  • 2 large 6” dust ports, one for each function, can connect to your dust collector so your shop stays pristine with safe, breathable air.
  • This digital planer is covered by a 1-year parts warranty.
  • Replacement parts are in stock at our Wisconsin warehouse. We can get them to you without delay.
  • You can count on lifetime technical support by phone from a team of experience woodworkers, all of whom know our machines inside and out.

Order this heavy-duty jointer planer today!

Specs

Item Number JP-1898-NC
Shipping Weight 3100lbs
Table Size (Length) 98"
Table Size (Width) 18"
RPM 5700
Fence Tilt 45°
Cutter Head Diameter 4.75'
Max Stock Width 18'
Number of Knives Helical Head
Maximum Stock Height 9.8"
Minimum Stock Thickness 3/16'
Feed Speed 16 to 50 FPM Variable
Table Elevation Digital Control
Jointer Maximum Cutting Depth 1/4"
Power 220V Three Phase
Horse Power 7.5
Weight (lbs) 3036
Shipping Dimensions (Inches) 106x48x59

* specifications subject to change without notice.