Stain Rescue Remover ( Formerly Known as Tenax Quartz Extraclean Pro )

Stain Rescue Remover is a solvent-based cleaner for removing suction cup rings, grease, and vacuum marks from quartz slabs

Remove those vacuum rings from your quartz slabs with Stain Rescue Remover. This 1-quart container of solvent-based cleaner is designed for removing greasy suction cup rings from quartz slabs. Stain Rescue Remover penetrates the pores of the material to remove grease that can make its way into the quartz. These rings can be difficult to remove without a product designed specifically for the purpose of eliminating these kinds of discolorations.

Compatible Accessories

Slab handling equipment makes moving quartz and engineered stone slabs a piece of cake. however, these machines leave their mark on the slab. 1 qt. Stain Rescue Remover suction cup and vacuum ring remover is made to get into the pores of the slab and remove those unwanted greasy circles that are left by the machines.

Coverage

One quart of Stain Rescue Remover covers approximately 200-300 square feet of material.

Instructions

Using 1 Quart Stain Rescue Remover is easy. Just pour the product directly on a clean cloth and rub the remover onto the slab in the location of the ring. For stronger marks you may have to apply Stain Rescue Remover 1 Quart vacuum ring remover directly to the slab. If applying directly to the slab, distribute the Stain Rescue Remover evenly with a clean cloth and leave it for 1-2 minutes. After 1 or 3 minutes, rub with the same cloth in a circular motion until the marks are removed. In cases where the problem persists, you may have to reapply with a longer waiting time.

Instructions

1. Pour Stain Rescue Remover 1 Quart Directly on A Clean, Soft Cloth
2. Rub the Area of the Stone with the Ring Until the Ring is Gone

Instructions for Tough Stains

1. Pour Stain Rescue Remover 1 Quartz Directly on the Slab
2. Distribute Evenly Over the Slab
3. Wait 1 to 2 Minutes
4. Wipe Area with the Same Cloth

Instructions for Persistent Stains

1. Pour Stain Rescue Remover 1 Quartz Directly on the Slab
2. Distribute Evenly Over the Slab
3. Wait Longer Than 1 to 2 Minutes
4. Wipe Area with the Same Cloth