Grip ‘N Seal Additive (Case of 12)

Grip ‘N Seal Additive Goes with a sealer such as Glaze and Seal Water Base Sealer

Glaze N Seals Grip N Seal is a unique micronized polymer powder which when mixed with a coating type sealer or paint creates a textured, slip resistant surface without a sharp abrasive finish. Use on driveways, patios, garage floors, walkways, steps and pool areas.

•  Add to any film forming sealer or paint
• Improves slip resistance
• Will not alter sealers appearance
• Mixes easily with any Glaze N Seal Coating sealer
• Easy to use
• Stays suspended in sealer
• Long wearing

PRODUCT DESCRIPTION:

GLAZE ’N SEAL’S GRIP ’N SEAL is a unique micronized polymer which when mixed with a coating type sealer or paint creates a textured, slip resistant surface without a sharp abrasive finish. Use on driveways, patios, garage floors, walkways, steps and pool areas.

USES:  Use on plain concrete, any decorative concrete, unglazed tile, stone, masonry and brick.

Grip ’N Seal Additive can be used with these Glaze ’N Seal products:

• All“Wet Look” Lacquers
• Paver Sealer
• "Wet Look” 2000 Lacquer
• Slate Sealer
• Paver Sealer
• Olé Mexican Tile Sealer
• Water based “Wet Look” II
• Multi-Purpose Sealer May also be used with water-based or solvent-based paint.

FEATURES:

• Mixes easily with any Glaze ’N Seal coating sealer
• Easy to use
• Stays suspended in sealer
• Long wearing
• Will not alter sealer appearance

INSTRUCTIONS FOR USE ALWAYS TEST when using to insure suitable application and satisfactory results.

• Add full jar of Grip ‘N Seal Additive to a five gallon pail of sealer or paint. For a gallon of sealer use 2.0 ounces. Mix well.
• Apply sealer as normal
• Stir occasionally during use to ensure an even dispersion.

CAUTION Not recommended for use in penetrating sealers or stains. Avoid breathing dust. Contact with eye and skin may cause irritation. DO NOT INGEST. Grip ’N Seal is not hazardous, but should be treated as a nuisance dust while mixing. Use with adequate ventilation, or wear an appropriate, properly fitted respirator (NIOSH/MSHA approved) during mixing. If dizziness, headache or eye watering occurs, get to fresh air. Keep container closed when not in use. If spillage occurs, absorb and dispose of, according to local regulations.