Prosoco Sure Klean Tilt-Up Klean Bond Breaker Residue Cleaner - 5 Gallon

Prosoco Sure Klean Tilt-Up Klean — Bond Breaker Residue Cleaner for Tilt-Up Concrete

Prosoco Sure Klean Tilt-Up Klean is a concentrated, water-based cleaner formulated specifically to remove bond-breaker residue from tilt-up or off-form concrete surfaces prior to the application of paints, coatings, or protective treatments. Designed for use by contractors and construction professionals working on tilt-up concrete panels, this product effectively dissolves and removes stubborn residues left behind by both water-based and solvent-based bond breakers. It is designed to be diluted at a ratio of 1 part cleaner to 5 parts water, making on-site mixing straightforward and economical. Applied via low-pressure spray, Tilt-Up Klean delivers reliable, consistent surface preparation results on a wide range of tilt-up concrete substrates.

Unlike aggressive acid-based or solvent-based cleaners, Tilt-Up Klean achieves thorough bond-breaker removal without the use of harsh acids, caustics, chlorinated solvents, fluorinated solvents, aromatic or hydrocarbon solvents, or phosphates. Its non-caustic, low-hazard, nonflammable formulation reduces safety risks on the job site and simplifies compliance with VOC regulations, as it meets all national, state, and district VOC requirements. Contractors who need to prep concrete surfaces efficiently and responsibly will find this product a superior alternative to harsher chemical options.

Key Features & Benefits

Removes Both Water-Based and Solvent-Based Bond Breaker Residues

Tilt-Up Klean is engineered to handle residues left by both water-based and solvent-based bond breakers, giving contractors flexibility across different jobsite conditions and panel specifications. This dual compatibility eliminates the need for multiple cleaning products and reduces material costs and handling complexity on the job site.

Non-Caustic, No Harsh Acids or Solvents

The formulation contains no chlorinated, fluorinated, aromatic, or hydrocarbon solvents, no harmful acids or caustics, and no phosphates. This significantly lowers the hazard profile compared to traditional concrete cleaners, protecting workers, surrounding surfaces, and the environment during application and cleanup.

Concentrated, Water-Based Formula for On-Site Dilution

The concentrated formulation dilutes at a 1:5 ratio (one part cleaner to five parts water), allowing contractors to mix only what they need on-site and reducing shipping and storage costs per square foot cleaned. The water-based chemistry also means easy equipment cleanup after application.

Low-Pressure Spray Application

Tilt-Up Klean is applied with standard low-pressure spray equipment, making it accessible and fast to deploy without specialized tools. Rinsing is accomplished with pressure washing at 400–1,000 psi using a 15–45° fan tip, a setup that most concrete contractors already have on hand.

Cleans and Conditions Concrete Surface

Beyond simple residue removal, Tilt-Up Klean cleans and conditions the concrete substrate by removing stubborn contaminants, leaving the surface properly prepared for coatings, paints, and protective treatments. Proper surface prep at this stage is critical to coating adhesion and long-term performance.

Biodegradable Ingredients and VOC Compliant

The product contains readily biodegradable ingredients and is compliant with all national, state, and district VOC regulations, simplifying regulatory compliance for contractors working in environmentally sensitive or highly regulated regions. Its low toxicity and nonflammable nature further ease handling and disposal requirements.

Common Applications

Pre-Coating Surface Prep on Tilt-Up Concrete Panels

Used before applying paints, elastomeric coatings, or other protective treatments to tilt-up concrete panels to ensure bond-breaker residues are fully removed and adhesion is not compromised.

Off-Form Concrete Surface Cleaning

Effectively cleans off-form concrete surfaces where bond-breaker or form-release agents have been used during casting, preparing the substrate for downstream finishing or coating work.

Pre-Sealer Preparation on Tilt-Up Walls

Prepares tilt-up wall surfaces prior to application of penetrating sealers or surface-applied protective treatments by removing residues that would otherwise interfere with penetration or adhesion.

Removal of Solvent-Based Bond Breaker Residues

Handles the more challenging cleanup of solvent-based bond breaker residues without requiring aggressive solvent or acid-based chemistry, protecting the concrete surface integrity during prep.

Removal of Water-Based Bond Breaker Residues

Quickly dissolves and removes water-based bond breaker films from concrete panels, delivering a clean, conditioned surface ready for treatment or coating.

Tilt-Up Construction Projects Requiring VOC-Compliant Cleaning

Ideal for projects in jurisdictions with strict VOC regulations, as the product is fully compliant nationwide and does not require special permitting or regulatory exceptions for use.

Compatible Materials

• Tilt-up concrete panels
• Off-form (form-cast) concrete surfaces
• Concrete surfaces treated with water-based bond breakers
• Concrete surfaces treated with solvent-based bond breakers
• Concrete substrates to be painted or coated
• Concrete substrates to receive penetrating or surface-applied protective treatments

Product Documents

• Product Data Sheet
• Product Data Sheet (Canadian French)
• Product Data Sheet (Spanish)
• Safety Data Sheet
• Safety Data Sheet (Spanish)
• Safety Data Sheet (Canadian French)

Application Instructions

Step 1: Preparation

1. Read the full Safety Data Sheet and all label instructions before use.
2. Test all substrates not intended for treatment to confirm suitability. If testing indicates adverse effects, protect the substrate before full-scale application.
3. Protect people, vehicles, property, plants, and all surfaces not set for cleaning from product, splash, rinse water, residue, fumes, and wind drift.
4. Rinse any non-target materials with large quantities of water. Protect grass and plantings with sprinklers. Divert pedestrian and vehicle traffic if necessary.
5. Do not apply when air or surface temperatures are below 40°F (10°C) or if freezing temperatures are expected overnight. Allow frozen concrete to fully thaw before cleaning.

Step 2: Dilution and Mixing

1. Mix the product concentrate well before diluting.
2. Dilute one part Tilt-Up Klean concentrate with 5 parts hot or cold water. Do not apply the product in concentrate form.
3. Do not alter or mix the product with other chemicals except as specified.

Step 3: Application

1. Apply diluted Tilt-Up Klean liberally to a dry concrete surface using a low-pressure sprayer.
2. On hot, windy days, in low-humidity conditions, or when cleaning large sections, prewet the wall to prevent the product from drying too quickly before rinsing.
3. Allow the cleaner to dwell for up to five minutes. Keep the surface wet throughout the dwell time — do not allow the product to dry on the surface before rinsing.
4. The sprayed surface will visibly darken when bond-breaker residue has dissolved, indicating the cleaner is working.

Step 4: Rinsing

1. Rinse thoroughly using pressure washing at 400–1,000 psi with a water flow rate of 6–8 gallons per minute.
2. Use a 15–45° fan spray tip for best results on porous concrete.
3. Heated rinse water (up to 140°F / 60°C) may improve cleaning efficiency.
4. Do not allow the cleaner to dry on the surface before rinsing.

Coverage Rates

1. Coverage varies based on surface texture, porosity, weather conditions, and severity of contamination. Always test before full application.
2. Typical coverage: 1 gallon of diluted Tilt-Up Klean cleans approximately 200–250 sq. ft. (19–23 sq. m.).
3. Do not over-apply.

Storage and Handling

1. Store in a cool, dry place with adequate ventilation.
2. Always seal the container after dispensing.
3. Do not alter or mix with other chemicals.
4. Maintain storage temperatures of 45–100°F (7–38°C).
5. Store containers upright. Do not double-stack pallets.
6. Shelf life is 2 years in a tightly sealed, unopened container stored as directed.
7. Dispose of unused product in accordance with local, state, and federal regulations.

Limitations

1. Do not let the cleaner dry on the surface before rinsing.
2. Not intended for removal of concrete curing compounds, cure-and-seal products, or other coatings. Prosoco Cure & Seal Remover may be more appropriate for those applications. Contact Prosoco Customer Care at 800-255-4255 for further product recommendations.

Technical Specifications

Safety Data Summary

Hazard Information

• Low-hazard formulation
• Low toxicity
• Nonflammable (flash point >212°F / >100°C)
• Water soluble
• Contains no chlorinated, fluorinated, aromatic, or hydrocarbon solvents
• Contains no harmful acids or caustics
• Contains no phosphates
• 24-Hour Emergency Information: INFOTRAC at 800-535-5053

Personal Protective Equipment

• Always read the full product label and Safety Data Sheet before use
• Use appropriate safety equipment as specified in the SDS
• Implement proper job site controls during application and handling

Safe Handling

• Store in a cool, dry, well-ventilated area
• Keep container tightly sealed after each use
• Do not mix with other chemicals or alter the product outside of specified dilution instructions
• Maintain storage temperatures between 45–100°F (7–38°C)
• Do not double-stack pallets during storage
• Dispose of unused product in accordance with local, state, and federal regulations
• Do not allow product to dry on concrete surface before rinsing
• Protect non-target surfaces, vegetation, and personnel from product splash and wind drift

Frequently Asked Questions

Q: What types of bond breakers does Tilt-Up Klean work on?
A: Tilt-Up Klean is formulated to remove residues left by both water-based and solvent-based bond breakers, making it suitable for a wide range of tilt-up and off-form concrete construction applications.

Q: What is the correct dilution ratio for Tilt-Up Klean?
A: Dilute one part Tilt-Up Klean concentrate with 5 parts hot or cold water. Do not apply the product in undiluted concentrate form. Mix the concentrate well before diluting.

Q: What is the typical coverage rate for diluted Tilt-Up Klean?
A: One gallon of diluted product covers approximately 200–250 square feet (19–23 sq. m.), though actual coverage will vary based on surface texture, porosity, weather conditions, and severity of contamination. Always test before full application.

Q: Can Tilt-Up Klean be used to remove curing compounds or cure-and-seal products?
A: No. Tilt-Up Klean is not intended for the removal of concrete curing compounds, cure-and-seal products, or other coatings. Prosoco Cure & Seal Remover may be more appropriate for those applications. Contact Prosoco Customer Care at 800-255-4255 for further recommendations.

Q: What temperature conditions are required for application?
A: Best results are achieved when air and surface temperatures are 40°F (10°C) or above. Do not apply when temperatures are below freezing or expected to drop below freezing overnight. Allow any frozen concrete to fully thaw before cleaning begins. Colder temperatures may slow the rate of residue removal.

Q: Is Tilt-Up Klean VOC compliant?
A: Yes. Sure Klean Tilt-Up Klean is compliant with all national, state, and district VOC regulations, making it suitable for use on projects in environmentally regulated or restricted areas without special exceptions.

Q: What equipment is needed to apply and rinse Tilt-Up Klean?
A: Apply the diluted cleaner using a standard low-pressure sprayer. For rinsing, use pressure washing equipment capable of 400–1,000 psi with a water flow rate of 6–8 gallons per minute and a 15–45° fan spray tip. Heated rinse water up to 140°F (60°C) can improve cleaning efficiency on heavily soiled surfaces.