Augers For Skid Steer Loaders 2.5-3.8T & Mini Excavators 3-5T

Digga's range of drilling augers for 2.5-ton to 3.8-ton Skid Steer Loaders & 3-ton to 5-ton Excavators are the ultimate in performance, quality and cost effectiveness.

Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest-grade materials and strictest quality control.

Fitted with Digga / Eaton bell motors with integrated pressure relief valve (auger drive for Mini Excavator) and input housing. The innovative design allows the gearbox to go down the hole to maximize drilling depth without extensions, eliminating downtime and minimizes maintenance, optimizing your returns.

Digga drilling augers are backed by industry leading warranty and local factory support.

Digga planetary augers are specially designed for Excavators for drilling and augering in most ground conditions. The addition of our patented "Energy Control Valve" turns the drilling drive into a screw anchor drive (auger drive for Mini Excavator).

Features:

• Compact high torque Digga manufactured gearbox
• Digga designed Eaton motor
• Optional integrated pressure relief valve to eliminate the need for bulky valve blocks and reduce many potential leak points (auger drive for Mini Excavator)
• 2 Piece shaft design ensures maximum side load ratings without increasing load on bearings
• Lifetime shaft pull out warranty
• 5-year gearbox and 3-year motor warranty
• Over 30 years design and manufacturing experience
• Easily converted to a screw anchor drive with the addition of our patented 'anti-kickback valve' (auger drive for Mini Excavator)

Specs	3DSS	4DSS	4DDS
Torque (FT-LBS @ 3000 PSI)	2,829	3,275	3,583
Max Torque FT-LBS @ 3500 PSI	3,300	3,821	4,180
Recommended Flow (GPM)	10-30	10-30	10-36
Motor Type	Eaton	Eaton	Eaton
Max Pressure - Do Not Exceed	3500 PSI @ 16 GPM		3500 PSI @ 27 GPM
Max Flow - Do Not Exceed	30 GPM @ 1800 PSI		42 GPM @ 3100 PSI
Max Horse Power	34	34	55
Pressure Relief Valve	Optional	Optional	Included
Standard Output Shaft	2" Hex	2" Hex	2" Hex
Halo	Optional	Optional	Optional
Recommended Auger	A4 / RC4	A4 / RC4	A4 / RC4
Max Drilling Diameter (Clay / Shale)¹	24"	24"	24"
Max Drilling Diameter (Earth)¹	30"	30"	40"
Weight (lbs.)	123	125	180
Overall Length (in.)	25.9"	25.9"	29"
Diameter (in.)	9.4"	9.4"	9.4"

¹Max/min drilling diameter (DIA) dependent on ground conditions. Guide is a recommendation only.

3DSS				4DSS				4DDS
Output Speed		Output Torque		Output Speed		Output Torque		Output Speed		Output Torque
GPM	RPM	PSI	FT-LBS	GPM	RPM	PSI	FT-LBS	GPM	RPM	PSI	FT-LBS
10	33	1,500	1,414	10	28	1,500	1,638	8	22	1,500	1,791
12	39	1,700	1,603	12	34	1,700	1,856	13	32	1,700	2,030
14	46	1,900	1,792	14	39	1,900	2,074	17	43	1,900	2,269
16	52	2,100	1,980	16	45	2,100	2,293	21	54	2,100	2,508
18	59	2,300	2,169	18	51	2,300	2,511	25	65	2,300	2,747
20	65	2,500	2,357	20	56	2,500	2,730	29	75	2,500	2,986
22	72	2,700	2,546	22	62	2,700	2,948	34	86	2,700	3,225
24	78	2,900	2,735	24	67	2,900	3,166	38	97	2,900	3,463
26	85	3,100	2,923	26	73	3,100	3,385	42	108	3,100	3,702
28	91	3,300	3,112	28	79	3,300	3,603			3,300	3,941
30	98	3,500	3,300	30	84	3,500	3,821			3,500	4,180