Virtually Dust-free Cutting Solution!
The Ecocutter Dry Tile Cutting System was introduced two years ago as a portable dry cutting system for tile installers. This system included the Ecocutter, table and stand. Now, Alpha Professional Tools® is offering the Ecocutter as a stand-alone tool for all your dry cutting applications. The Ecocutter (ECC-125) is equipped with a built-in impeller that generates air flow to draw dust back, and deliver it to the dust bag, thus eliminating the harmful dust particles which are common in dry cutting applications. When combined with the proper accessories, the Ecocutter is a great choice for use in the shop or on the job site!
Other Alpha Saws
Alpha PSC-150 Pneumatic Stone Cutter
Alpha Countertop Trim Kit
Alpha AWS-110
ESC-125 Wet/Dry Stone Cutter
Features
- Virtually Dust-Free
- Portable Cutting System
- Accurate Cutting Performance
- Eliminates Downtime
- Built-In Breaker Assembly
- Great for Grout Removal, Crack Chasing and Concrete Profiling
- One Year Warranty* (*See manual for details)
Product Details
- Model ECC-125
- Rating 110/220 Volts
- Amperage 11.2 / 5.5
- Power 1200W
- No-Load Speed (min-1) 12,000 RPM
- Weight 9.5 lbs / 4.3 kgs
- Arbor 7/8" / 22.23mm
- Cutting Disc Diameter 5" / 125mm
- Max. Cutting Depth 1-1/8" / 29mm
Equipment Included
- Dust Hose 1
- Dust Gate 1
- Side Handle 1
- Hexagon Ring Spanner 1
- Wrench 1
- Dust Bag 1
- TT Ruler 1
- Hook & Loop Strap 2
| Part No. | Size | Type | Arbor(s) | Recommended For | For Use On | Description |
|---|---|---|---|---|---|---|
| ECC-125 | 5" | 110V | 7/8" / 22.23mm | Virtually Dust-free Cutting | Tile | Ecocutter |
| ECC-225 | 5" | 220V | 7/8" / 22.23mm | Virtually Dust-free Cutting | Tile | Ecocutter |
| 133544 | 17" x 13-1/2" x 12" | Dust Bag Carriage | Dust Bag w/strap |
- KKrisVerified ReviewerReviewingESC-125 Wet/Dry Stone CutterI recommend this productRated 5 out of 5 stars2 days agoExcellent
I mainly use the tool for removing of grout. I equipped a 1/4 in blade for the tile i service. Cuts Fast without getting caught or kickback. only tough thing is with the water flowing it is somewhat difficult to see where you are about to cut as the blade pushes the water into your cutting path. with the dirty water it is hard to see. Currently getting a shopvac setup to try and remove the water and grout waste during cutting to try to speed up the clean-up process. Been using the same blade now for a year and no slowing down seen. Purchased through amazon.